Many events occurred today which I never expected when I signed up for Roy’s class last November.
We started off the day with a healthy amount of metal work for two separate projects. One involved cutting copper pipe, beating it into a square cross section, drilling out screw holes and then soldering on nuts to accept the screws. These are to be used for a set of pinch rods, with two copper fixtures apiece. The only soldering I’ve done previously is guitar electrics, so using a ruddy great gas torch for soldering the copper bracket and brass nut was a new experience.
The second element of metal work was cutting brass inlay for use with Roy’s amazing passer drill on a project we will start tomorrow. I was more familiar with this work, having cut a fair amount of shell inlay for my guitars, but 3mm thick brass plate was a very different sort of material to work with. Lots of fun, and I’m quite pleased with how my inlay came out.
More parallel skills, more experiences. Perfect.
The afternoon was spent skip diving, which I definitely did not expect on this course (or in fact any other), for suitable timber for the pinch rods. Roy is clearly a master skip diver, and emerged with a haul of walnut, old growth mahogany, maple, and a teak skooner chair. I opted for some teak from the chair, which Roy expertly demolished. The teak turned out to have some crazy roped grain which tore out in every direction regardless of which plane I used (and yes, I tried the full complement of No.8 jointer, low angle block plane, and 212 scraper plane). But the pinch rods themselves came out pretty nicely, so I’m pleased with the end results of a pretty fun project,
As a final treat, Roy taught me how to play the saw. So expect more boings, squarks, and 1950’s sci-fi sound effects on my next brace of recordings. I may have to see if Mark has any nice vintage rip saws for sale – I prefer my musical saws to be in A sharp (A Sharp Saw, geddit? Yes ladies and gentlemen, I’m here all week. I think Ethan would be proud of this one).
Tomorrow holds more wonders and curiosities, but for now I’ll leave you with one of my favourite pictures of the course so far. Roy apparently appreciates my guitars! It might be time to retire…
Now if you’ll excuse me, apparently I have to play an open mic night in front of my course mates and instructors. There’s no way this can go wrong, is there?